Size：16mm*100m, 19mm*100m, 25mm*100m
Colour :ruby/blue/white/green/purple/yellow
Application:For abrasive belt butt joint
Uncoated tape are pre-primed to obtain maximum bond strength when using a thermosetting adhesive.
Sanding belt tape joint film.

Raw material: Deerfos JA512 abrasive cloth
Grain: Aluminium oxide
Backing:J weight backing
Application: making sanding belts for polishing copper alloy,aluminium alloy,zinc alloy,like polishing faucet,polishing lockset and polishing kitchen sink.

The diamond sanding belts was composed by base belts, diamond power bond.
Diamond sandind belts is superhard material coated abrasive product which is manufactured under new technology, It featured as the softness of conventional abrasive and hardness of diamond.
Diamond sandind belts are mainly used in grinding and polishing glass, stones, ceramics, mono-crystal silicon, polycrystal silicon, synthetic material, cemented carbide, aluminium alloy, etc.

Size: could be customized
Grain:silicon carbide
Backing material :polyester
Grit:P24~P600
Could sanding medium,high-density fiberboard,pine,log,particle board furniture and other wood meterial.
Used for glass,ceramic,stone,nonferrous metal,stainless steel and titanium.
Wide sanding belts for heavy duty sanding .
For both wet and dry sanding.
High cuting performance belts.

Size: more than 1.4m in width,2 or 3 seams
Grain:silicon carbide
Backing material :polyester
Grit:P24~P600
Could sanding medium,high-density fiberboard,pine,log,particle board furniture and other wood meterial.
Wide sanding belts for heavy duty sanding .
For both wet and dry sanding.
High cuting performance belts.

Size: could be customized
Backing material :polycotton
Grit:P40~P600
Could sanding hard titanium alloy,high carbide stainless steel,heat-resistant alloy.
Narrow and wide sanding belts for heavy duty sanding .
Weld removal on sinks and tanks.
Stainless steel cutlery grinding.
Grinding turbine blade.
High cuting performance belts.

Size: could be customized
Backing material :polycotton
Grit:P40~P600
Could sanding wood and metal.
Narrow sanding belt for DIY .
Wood and metal finishing and polishing.
High performance belts.
Flexibility allows better polishing of contour parts.

Outer Diameter:100mm~300mm
Thickness：25mm~100mm
Grit:P80~P1000
Features:It could change into any shape to polishing male and female face, big and small side angle.
It could save many manual work to improve work efficiency.
It suitable for polishing and buffing the surface of wood ,furniture and shoe material.

Outer Diameter:15mm~80mm
Grain material :Aluminium Oxide, Zirconia Oxide, Ceramic ,Silicon Carbide.
Thickness：25mm
Shank Diameter:6mm metal shank
Features:High-quality abrasive cloth,high workking efficiency, more safe operating, no buring work-pieces, low noise, easily operating.
Suitable for grinding spots and weld seams of plates, and also for polishing the smaller parts and all kinds of internal bore, arc and curved surface.

Grain material :Zirconia Alumina
Size:120mm*100mm
Grit:P40~P320
Features:It have the sharp grinding and cutting blades, and high security and is ideal for surface polishing of metals.
It suitable for surface buffing , polishing ,finishing all kinds metal and wood.
For revoming rust ,oxide layer and scratch.
Excellent for wire drawing for stainless steel and metal.

Outer Diameter:100mm~350mm
Grain material :Zirconia Alumina
Thickness：20mm~70mm
Grit:P24~P1000
Features:It have the sharp grinding and cutting blades, and high security and is ideal for surface polishing of metals.
It suitable for surface buffing and polishing all kinds of stainless steel pipe shapes,containers.
With good heat dissipation,no damage to workpiece for rusting removing,weld line trimming.
Spots and weld seams can be ground by making a good choice among the dimensions and grit.

Outer Diameter:100mm~350mm
Grain material :silicon carbide
Thickness：20mm~70mm
Grit:P24~P1000
Features:It have the sharp grinding and cutting blades, and high security and is ideal for surface polishing of metals and for wood.
It suitable for surface buffing and polishing all kinds of stainless steel pipe shapes,containers and wood.
Fast cutting performance,excellent finishing.
Spots and weld seams can be ground by making a good choice among the dimensions and grit of the flap wheels .

Outer Diameter:100mm~350mm
Grain material :Aluminium Oxide
Thickness：20mm~70mm
Grit:P24~P1000
Features:It have the sharp grinding and cutting blades, and high security and is ideal for surface polishing of metals.
It suitable for surface buffing and polishing all kinds of stainless steel pipe shapes,containers.
The finishes from 6.3 to 0.1 can anyhow be achieved .
Spots and weld seams can be ground by making a good choice among the dimensions and grit of the flap wheels .

Outer Diameter:100mm / 115mm /125mm
Backing material: fiberglass / plastic backing
Grain material :Aluminium Oxide ,Calcined aluminium oxide , Zirconia Alumina .
Grit:P40~P320
Features:vertical design , with a right angle between flaps and backing.According to the requirements of operation, it adjusts the angle from 45°-90°. And most used for grinding and polishing parabolic surface.
Suitable for :metal surface grinding and polishing , weld seams grinding , rust removing.

Outer Diameter:100mm
Backing material: plastic backing
Grain material :Aluminium Oxide ，calcined aluminium oxide , zirconia alumina .
Grit:P40~P400
Features:the radial flap disc can be used in curved surface grinding and polishing , good flexibility , preventing work-pieces from being burnt , high grinding efficiency, double backing good safety in use and long service life.
Suitable for :metal surface grinding and polishing , weld seams grinding , rust removing.

Outer Diameter:100mm
Backing material: plastic or metal backing
Grain material :Aluminium Oxide , calcined / treated aluminium oxide ,zirconia alumina .
Grit:P40~P400
Features: The flexible / korea type flap disc can be used in curved surface grinding and polishing , good flexibility , preventing work-pieces from being burnt , high grinding efficiency , good safety in use and long service life.
Suitable for :metal surface grinding and polishing , weld seams grinding , rust removing.

Outer Diameter:100mm~180mm
Backing material: fiberglass / plastic /metal
Grain material :Ceramic grain
Type:flat shape ,conical or tapered shape
Grit:P40~P120
Features:High quality ceramic grain cloth , better for heavy grinding ,high thoughness , excellent durability and sharpness .
Suitable for : grinding and polishing for chromium steel , chrome-nickel steel , stainless steel , high-alloy steel , titanium steel , brass , bronze and etc.
Excellent self-sharpening , strong grinding .

Outer Diameter:100mm~180mm
Backing material: fiberglass / plastic /metal
Grain material :Zirconia alumina
Type:flat shape ,conical or tapered shape
Grit:P40~P320
Features:High quality zirconia alumina cloth , better for heavy grinding ,high thoughness and sharpness .
Suitable for :metal , high carbon steel and stainless steel grinding,deburring,wood grinding and polishing.

Outer Diameter:100mm~180mm
Backing material: fiberglass / plastic /metal
Grain material : treated / calcined aluminium oxide
Type:flat shape ,conical or tapered shape
Grit:P40~P320
Features:High quality treated / calcined aluminium oxide cloth , better for heavy grinding ,excellent durability and sharpness .
Suitable for :metal and high hardness materials surface grinding and polishing , weld seams grinding , rust removing.

Outer Diameter:100mm~180mm
Backing material: fiberglass / plastic /metal
Grain material :Aluminium Oxide
Grit:P40~P320
Type:flat shape ,conical or tapered shape
Features:High quality aluminium oxide cloth,good flexibility,high tensile and better bending strength,low noise and no clogging .
Suitable for :metal surface grinding and polishing , weld seams grinding , rust removing.

It mainly aims at polishing and electroplating drawing of copper and aluminum soft metal products,especially after chromium plating.
Aircraft,automobile and other parts processing,all kinds of metal workpiece surface treatment,stainless steel tableware,construction hardware,handle,hinge,door lock,electroplationg,lighting,golf club,copper aluminum products,bronze electroplating sweeping pattern,wood products,plastic,marble grinding,etc.

Outer Diameter:100mm /115mm/125mm
Backing material:plastic
Type:flat shape ,conical or tapered shape.
Mainly used for large mill can't grind various artifacts,flexible durable ,efficient ,self-sharpening,prevent,don't burn the workpiece surface(not black),smooth finish high characteristic.

Material: wool belt/woolen belt.
Features:could be used with polishing paste.
Suitable for : burnishing of guide rail and tubular structure.
Also could used for rust removing .

Suitable for injection mold fuffing and burnishing .
The burnishing of stainless steel member .
The buffing of aluminium product.
The buffing of tungsten carbide cutting disc.

Outer Diameter:100mm
Fast and steady finish without clogging , cooler cut , increase lifetime compared to standard surface conditioning discs. And then high-quality zirconia and non-woven mix product.

Outer Diameter:100mm /115mm/125mm
Mainly used for precision instruments, medical apparatus and instruments , glasswork, stainless steel, jade and marble .

Grit:80/180/120/220/320/400/600/800/1000/1500/2500
Perfect for sanding wood,metal,plastic and fiberglass,as well as removing old paint.
Excellent for sanding and dry-finishing of shaped pieces as well as unfinished or treated with nitro,polyurethane,acrylic and synthetic paints.
Convenient for hand using,also can be cut into the size you need.
Sharp,high effciency,durability,good extensibility

High security.
Excellent durablity.
For all types of materials.
Good quality price ratio.
High performance.

Easy and cool cut.
High security.
Specially developed for stainless steel.
No sulphur and chlorine
High performance.
For machine higher than 3KW.

Pyramid structure polishing product,mainly used for automotive paint,consumer electronics field,can be used to polishing the paint surface defects and hanging.
Also available for stainless steel ,glass ,plastic and other products surface polishing treatment.
Application:automotive paint repair ,piano paint repair,ceramic back cover.

Apply to heavy duty sanding
Characteristic: soft lubrication long service time
Used on sanding machine and for sanding belts

Apply to normal sanding
Characteristic:soft lubrication
Used on sanding machine and for sanding belts

Area of application generally and particulary : De-burring, removing lacquer, de-rusting, removing slag, de-scaling, clearning. Brush with medium fill density, for cleaning jobs such as removing paint,rust,scale,undustrial and burrs-with efficient brushing resulgs.
Cup brush ideal for brushing larger surface, good price/performance ratio.Uniform brushing, even in difficult to reach areas.

Outer Diameter:65mm/75mm/100m/125mm/150mm
Material :Steel wire
Cleaning Metal: Wire cup brush is designed for cleaning metal, very suitable for solder beads.
Remove Burr: Can remove burrs of the machined surface and the sharp edges on the metal plates.
Universal:With a universal arbor, suitable for most grinders and powder coatings, can prevent rust and corrosion.

Outer Diameter:75mm~200mm
Material :Steel wire
Application:Wire wheel, silver knot wire brush for angle grinder, rust paint removal, steel wire wheel brushes, twisted bristles for edge blending.
Festures:after polishing and drawing,the silk path will not appear different in depth,which mainly reflects the uniformity of the silk path.The 0.5mm spring steel wire and the structure gap are very elastic,so that the workpiece surface will not be black due to overheating during grinding.

Outer Diameter:100mm/115mm/125mm/150mm/180mm
Grain material :Aluminium oxide
Backing Material:fiberglass
Holes:No hole/6 holes/8 holes /customized
Grit:P24~P320
Fiber discs are ideal for grinding, stock removal, beveling, weld blending, deburring, rust removal, cleaning and finishing. Applied on rust, paint, ferrous, stainless steel, non-ferrous metals, wood and plastics.

Outer Diameter:100mm/115mm/125mm/150mm/180mm
Grain material :Aluminium oxide
Backing Material:Hook and loop
Holes:No hole/6 holes/8 holes /customized
Grit:P36~P320
Hook and loop sanding disc is made of aluminum oxide for good sanding effect and long service life;It will not fall apart, tear or crumble off during use; resin bonded sandpaper ensures paper backing flexible, which makes a good fit to your hand or machine.

Availiable grit : coarse , medium ,fine
Suitable for wet and dry polishing .
Applications : for woold and metal surface grinding.
Removal of old lays of paint .
Size: could be any size and shape.

Grit: coarse / medium / fine
Could be different size and shape.
Suitable for wet and dry polishing
Applications: For wood and metal surface grinding .
Removal of old lays of paint .

Outer Diameter:100mm /115mm/125mm
Have black and blue two types clean / strip disc.
Black Type clean / strip disc :quick abrasive wheel ,remove light coating and painting .
Blue type clean / strip disc : high efficiency , high coefficient of fricition , longer life .
Suitable for : painting or coating , mainly used in automobile repair, concrete work piece polishing .
This products is a quick change attachment advice that features metal to metal locking system for discs that are many sizes .

Outer Diameter:100mm~350mm
Grain material :Aluminium Oxide or silicon carbide
Thickness：25mm~500mm
Grit:P60~P200
It always used on electric polishing and wire drawing machine.
It's excellent for wire drawing of stainless steel,such as the surface of large machine and surface treatment of metal household aplicance.
it's suitable for the site can't fix polishing machine.